On the Cable Pegboard, click a Copper Cross-Over cable.
Click the GigabitEthernet 0/ 1 port on S 2 and then click the GigabitEthernet0/0/1 port on R2 to connect them.
On the Cable Pegboard, click a Copper Straight-Through cable.
Click the GigabitEthernet 0/ 1 port on S1 and then click the GigabitEthernet0/0/1 port on R1 to connect them. Click and drag the Web Server to the Rack. Click and drag the routers R1 and R2 and the switches S1 and S2 to the Rack.
There are several switches, routers, and other devices on the Shelf.
Packet Tracer will score the correct cable and port connections. Float your mouse over the ports to see the port numbers. To select the correct port on a switch, right click and select Inspect Front. Power on the PCs and cable the devices according to the topology. Place the required devices on the rack and the table. Instructions Part 1: Build the Network and Configure Basic Device Settings Step 1: Cable the network as shown in the topology. Note : The equipment required for this activity is located in the wiring closet on the utility shelf. After the initial configuration, the organization has asked for the configuration to be optimized to reduce protocol traffic and ensure that R1 remains in control of routing. R1 will share the default route information to R2. You have been tasked with configuring a small company’s network using OSPFv2. Part 3: Optimize and Verify the Single-Area OSPFv2 C onfiguration Background / Scenario Part 2: Configure and Verify Single-Area OSPFv2 for B asic O peration Part 1: Build the Network and Configure Basic Device Settings Topologyīlank Line – no additional information Objective s Packet Tracer – Configure Single-Area OSPFv2 – Physical Mode (Answers Version)Īnswers Note : Red font color or g ray highlights indicate text that appears in the Answers copy only. CCNA 3 ENSA v7.02 - Packet Tracer Activities Answers & Solutionsġ.0.5 Packet Tracer – Logical and Physical Mode Exploration AnswersĢ.2.13 Packet Tracer – Point-to-Point Single-Area OSPFv2 Configuration AnswersĢ.3.11 Packet Tracer – Determine the DR and BDR AnswersĢ.4.11 Packet Tracer – Modify Single-Area OSPFv2 AnswersĢ.5.3 Packet Tracer – Propagate a Default Route in OSPFv2 AnswersĢ.6.6 Packet Tracer – Verify Single-Area OSPFv2 AnswersĢ.7.1 Packet Tracer – Single-Area OSPFv2 Configuration AnswersĢ.7.2 Packet Tracer – Configure Single-Area OSPFv2 – Physical Mode AnswersĢ.7.3 Packet Tracer – Multiarea OSPF Exploration – Physical Mode (Part 1) AnswersĢ.7.3 Packet Tracer – Multiarea OSPF Exploration – Physical Mode (Part 2) AnswersĢ.7.3 Packet Tracer – Multiarea OSPF Exploration – Physical Mode (Part 3) AnswersĬCNA 3 ENSA v7.02 - Student Lab Answers & SolutionsĢ.7.2 Lab – Configure Single-Area OSPFv2 Answers
0 kommentar(er)
